Click here to close now.

Welcome!

GovIT Authors: Jason Bloomberg, AppDynamics Blog, Liz McMillan, Pat Romanski, Elizabeth White

Related Topics: PowerBuilder, .NET

PowerBuilder: Article

The PostOpen Event – Why It Is So Important

PowerBuilder fundamentals

Normally I try to write applications on the DataWindow or Appeon but every now and then I get a question that makes me sit back and say, "Huh?"

In this case the question concerns the PostOpen event. I've seen that event named different things: ue_post_open, postOpen, post_open, ue_postOpen, etc. It has, as far as I can see, always had post and open in the name of the event. Further, just about every framework that I've ever seen has had that event in the base window.

The question that I was asked was, "Why is that event there?"

The programmer wanted to know why there was code in the post open and why was it not just put at the end of the open event? At first I was really confused by the question. It was like he was asking me why do we have arrays? I just couldn't imagine not knowing the answer.

Then it occurred to me that I learned the answer to that question from a book that was published almost 20 years ago. As far as I can tell there are no new books on PowerBuilder and there are only two print magazines, this one and the ISUG magazine.

That's it.

Further I came to think of the tremendous responsibility that the few PowerBuilder authors share. New PowerBuilder programmers turn to us for information and there aren't that many of us left writing. So that leaves a whole lot of PowerBuilder programmers who get all their training from reading the code of other programmers.

Often those other programmers were consultants who wrote the code ten years ago and worked for consulting firms that no longer exist.

To make a bad situation worse a lot of times those programmers are brave souls that have been recruited from other disciplines. When the company finds that their last PowerBuilder programmer has just quit because he got a much better offer they turn to their existing programming staff and ask who would like to pick up PowerBuilder. They may point out that there are 6 or 10 or, as in the case for one company for which I recently worked, 26 PowerBuilder programs that are all critical to the company. The PowerBuilder programmer would become indispensable to the company.

So suddenly a brave Visual Basic or Java programmer finds PowerBuilder installed on his machine. His boss pats him on his pointy little head and tells him that Google is his friend.

Where would you turn? If you picked up the mantle and offered to learn a language that you knew nothing about, what would you do? You'd turn to Amazon or Google. If you type "best PowerBuilder books" in Google the first mentioned is my Definitive DataWindow which was published 13 years ago and is embarrassingly out of date...and out of print.

Let's go to Amazon, there you will find the latest PowerBuilder book is for version 9. It was published 10 years ago. Since then... nothing.

Why should I be surprised that things that I find fundamental are entirely unknown by the newest PowerBuilder programmers.

Warning: If you are a seasoned PowerBuilder programmer the rest of this article will bore you silly.

There is an open event in a window. This is the event that happens when the window is "opened." Now the word ‘open' can be deceptive. A lot of people feel that a window is only opened when it is shown on the screen.

That would be wrong.

The open of a window begins when the open command is issued. That is to say, with a line like:

Open(w_client_editor)

The problem, the whole reason that a post open event is required goes all the way back to Microsoft Windows 3.0 Old Windows programmers will remember version 3.0 very well. Version 3.0 was almost the death of Microsoft Windows. It was unbearably slow. I am not exaggerating; it was the slowest version of Windows that was ever released.

It was so slow that Windows users were seriously studying what the impact of changing to another - any other - operating system would be.

This time Microsoft listened... and panicked. They did a study to determine what it is that makes the user perceive speed in an application. What could be changed to cause the user to believe that the application is faster with minimal real change to the operating system? It wasn't that Microsoft didn't want to address their problems with speed, they most certainly did, but addressing those problems would take time that Microsoft just didn't have. Microsoft was about to lose a lot of customers and once lost, it would be hard to get them back.

Microsoft learned that the visual perception strongly influenced the user's perception of speed. They learned that if the window POPPED onto the screen, all at once, even if the data wasn't there yet, then the users perceived speed. What killed the user perception was when they pressed a button and nothing happened for four seconds. The user would often punch that button two or three times. So Microsoft created operating system queues.

The graphics queue happened before the application queue. So graphics could be given a higher priority than the application and windows would paint faster. They released version 3.1 which was mostly just the addition of these queues (along with other changes like a floating point emulator in assembly code).

This was great but it broke the relationship of the open event with the code. This meant that you weren't guaranteed that everything would be created in the window until after the open event finishes.

Consider this code:

W_customer.open() event
Dw_1.setTransObject(sqlca)
Dw_1.retrieve()

This code would often result in a "Null object reference" error because dw_1 had not been created by Microsoft when the code ran.

Imagine how we felt when this happened. There was a null object reference in line 1 of the open event, but, but, but... that's dw_1. There it is, right there on the window! How can it be null? It's not dynamic. You put it there.

Okay, we learned that we should not put anything in the open event that referred to anything on the screen. Most of us learned to just not put anything at all in the open event except one line in the ancestor:

W_root.open() event
post event ue_post_open( )

For reasons already stated I imagine I can't rely on you knowing the difference between post event and trigger event or for that matter between postOpen and post open.

Okay, one at a time. Posting an event means that Microsoft Windows will open this window after the rest of the code in this script is executed. Basically it means, "Do this when you get a chance." So if you add that to the open event of your root window then it will call the ue_post_open event after all of the code in all of the descendants of this window is done.

Keep in mind the order of execution of events. First PowerBuilder goes to the farthest ancestor and then starts executing down the inheritance tree. If you have w_grandpa, and w_pa inherits from that and w_son inherits from that then the code in w_grandpa.open would execute first, then the code in w_pa, finally the code in w_son.

This means that if we put the post event in the open of w_grandpa, then the ue_post_open would happen after the last open event in the descendants. In our example:

W_grandpa.open->w_pa.open->w_son.open-> w_grandpa.ue_post_open-> w_son.ue_post_open->w_son.post_open

All that we have to do is create a ue_post_open event in our root window. We don't have to put anything in it, just create one. Then we post that event from the open event and we have a place now to put all our initialization code and don't have to worry about whether any object exists or not.

More important the screen will quickly draw or paint, giving the user the perception of speed. If you need to retrieve data and know it will take a short time, then you can set the pointer to an hourglass. I guarantee that your user will feel the window is faster.

I mentioned that most of us learned not to put anything in the open event. There is an exception to that rule. When your window is opened with a parameter then you should access the message object as the first line of code in your window.

Let me give you an example. Suppose that you open a window with a customer_id. You are going to use that customer_id as a parameter to the datawindow dw_1. Here is what you would do.

W_calling_window
Long ll_customer_id
Ll_customer_id = dw_detail.getItemNumber(dw_detail.getRow(), "customer_id")
openWithParm(w_customer_detail, ll_customer_id)

Now in the w_customer_detail window you need to set an instance variable. That's because we have just passed a variable to the new window and we are going to get it in the open event but we are going to retrieve the DataWindow in the ue_postOpen event. So let's do this. I will assume that you know how to declare an instance variable. Let's name it il_customer_id. Now let's look at the open event of w_customer_detail.

W_customer_detail.open()
il_customer_detail = message.longParm

Okay, now in the open event of w_customer_detail we have taken the longParm property of the global message object and put it in an instance variable.

Since we have inherited the w_customer_detail from whatever our base window is, the ue_postOpen event will automatically fire. That means that we don't have to fire off the event. Now I just have to put the code that we need in the window.

W_customer_detail.ue_postOpen()
dw_customer_info.setTransObject(sqlca)
dw_customer.retrieve(il_customer_detail)

Let's Do Some Housekeeping
I think that we've pretty well covered the post open event but in the process of doing that I've brought up a couple of other issues that I'd like to cover just to be complete.

First let's talk about post event as opposed to postEvent.

With the post event command you must know the name of the event that you want to post. You can pass the parameters normally. However, just like calling a function, the event has to exist and the parameters must be correct.

On the other hand the postEvent function takes a string as a parameter and that string is the name of the event. This means that you can store the name of the event in a table. In fact the event doesn't even have to exist. If it doesn't then nothing will happen. There will be no error thrown.

This makes the postEvent perfect for security systems where you can post an event based on a security role. Here is some code that might work for you in a menu event.

M_main.m_file.m_save.clicked
Datastore ld_security, ld_events
ld _secutity = create datastore
ld_events = create datastore

ld_events.dataobject = "d_events"
ld_security.dataobject = "d_get_security"

ld_events.setTransObject(sqlca)
ld_security.setTransObject(sqlca)

parentWindow.postEvent(ld_events.retrieve(ld_security.retrieve(gs_user_id)))

Using the postOpen function is very flexible but it is limited in the parameters that can be passed it. If you use the post event command, you can pass any number of parameters that you wish. The caveat is that the event must exist or you will get a compile time error. So the event that you used before for security cannot be done.

All that I just said for the postEvent and post event command applies also to the triggerEvent and trigger event commands.

Finally I'd like to mention the global message object.

This object is global. It can be accessed at any time by any other object. That means that if you access the message object in the postOpen event then another window may have changed your message object properties and this could corrupt what you are expecting.

Don't take this lightly. More than once I've debugged and found this error and believe me it is difficult to find. The problem is that it is not an error with logic or data but a timing error. These can be close to impossible to find.

Please take my word for this, make it a golden rule. If you open a window with a parameter, the first thing you do in the target or opened window is grab that value from the message object and store it.

Also, if you do a closeWithReturn then you need to immediately get the value from the message object.

There you have it. I've covered in some detail some basic information that might not be so easily learned any more.

More Stories By Richard (Rik) Brooks

Rik Brooks has been programming in PowerBuilder since the final beta release before version 1. He has authored or co-authored five books on PowerBuilder including “The Definitive DataWindow”. Currently he lives in Mississippi and works in Memphis, Tennessee.

Comments (1) View Comments

Share your thoughts on this story.

Add your comment
You must be signed in to add a comment. Sign-in | Register

In accordance with our Comment Policy, we encourage comments that are on topic, relevant and to-the-point. We will remove comments that include profanity, personal attacks, racial slurs, threats of violence, or other inappropriate material that violates our Terms and Conditions, and will block users who make repeated violations. We ask all readers to expect diversity of opinion and to treat one another with dignity and respect.


Most Recent Comments
ywerde 02/20/13 04:14:00 PM EST

In your introduction you clearly state the problem new PowerBuilder developers face when they find the IDE installed on their machine. You then go on to talk about the lack of current training materials.
One important cost effective training resource you omitted is the online training from ISUG/eLearnIT. Everyone can learn more here.

@ThingsExpo Stories
The WebRTC Summit 2015 New York, to be held June 9-11, 2015, at the Javits Center in New York, NY, announces that its Call for Papers is open. Topics include all aspects of improving IT delivery by eliminating waste through automated business models leveraging cloud technologies. WebRTC Summit is co-located with 16th International Cloud Expo, @ThingsExpo, Big Data Expo, and DevOps Summit.
SYS-CON Events announced today that ProfitBricks, the provider of painless cloud infrastructure, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY., and the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. ProfitBricks is the IaaS provider that offers a painless cloud experience for all IT users, with no learning curve. ProfitBricks boasts flexible cloud servers and networking, an integrated Data Center Designer tool f...
SYS-CON Events announced today that Dyn, the worldwide leader in Internet Performance, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Dyn is a cloud-based Internet Performance company. Dyn helps companies monitor, control, and optimize online infrastructure for an exceptional end-user experience. Through a world-class network and unrivaled, objective intelligence into Internet conditions, Dyn ensures traffic gets delivered faster, safer, and more reliably than ever.
SYS-CON Events announced today that Open Data Centers (ODC), a carrier-neutral colocation provider, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. Open Data Centers is a carrier-neutral data center operator in New Jersey and New York City offering alternative connectivity options for carriers, service providers and enterprise customers.
SYS-CON Events announced today that On the Avenue Marketing Group, a sales and marketing firm that utilizes events to market and sell products to consumers, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. On the Avenue Marketing Group (OTA) is a sales and marketing firm that utilizes events to market and sell products to consumers. On behalf of our clients, we attend thousands of fairs, festivals, expos, concerts, conferences, and sporting events annually, helping them reach millions of individuals ...
SYS-CON Events announced today that ActiveState, the leading independent Cloud Foundry and Docker-based PaaS provider, has been named “Silver Sponsor” of SYS-CON's DevOps Summit New York, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. ActiveState believes that enterprises gain a competitive advantage when they are able to quickly create, deploy and efficiently manage software solutions that immediately create business value, but they face many challenges that prevent them from doing so. The Company is uniquely positioned to help address these challenges thro...
BroadSoft on Tuesday announced that it is a recipient of the 2014 Frost & Sullivan Market Leadership Award in the Hosted/Cloud Internet Protocol (IP) Telephony market for Latin America. According to Frost & Sullivan market research, the Latin America (LATAM) hosted/cloud Internet Protocol (IP) telephony market, including integrated unified communications and collaboration (UC&C) applications, is currently experiencing a rapid growth trajectory and is expected to exhibit a tenfold rise in annual revenues in the 2013-2020 period. With more than 600 cloud deployments internationally, BroadSoft w...
SYS-CON Events announced today that Vitria Technology, Inc. will exhibit at SYS-CON’s @ThingsExpo, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Vitria will showcase the company’s new IoT Analytics Platform through live demonstrations at booth #330. Vitria’s IoT Analytics Platform, fully integrated and powered by an operational intelligence engine, enables customers to rapidly build and operationalize advanced analytics to deliver timely business outcomes for use cases across the industrial, enterprise, and consumer segments.
SYS-CON Events announced today that Alert Logic, the leading provider of Security-as-a-Service solutions for the cloud, has been named “Bronze Sponsor” of SYS-CON's 16th International Cloud Expo® and DevOps Summit 2015 New York, which will take place June 9-11, 2015, at the Javits Center in New York City, NY, and the 17th International Cloud Expo® and DevOps Summit 2015 Silicon Valley, which will take place November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA.
SYS-CON Events announced today that Akana, formerly SOA Software, has been named “Bronze Sponsor” of SYS-CON's 16th International Cloud Expo® New York, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. Akana’s comprehensive suite of API Management, API Security, Integrated SOA Governance, and Cloud Integration solutions helps businesses accelerate digital transformation by securely extending their reach across multiple channels – mobile, cloud and Internet of Things. Akana enables enterprises to share data as APIs, connect and integrate applications, drive part...
SYS-CON Events announced today that CommVault has been named “Bronze Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY, and the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. A singular vision – a belief in a better way to address current and future data management needs – guides CommVault in the development of Singular Information Management® solutions for high-performance data protection, universal availability and sim...
SYS-CON Events announced today that SafeLogic has been named “Bag Sponsor” of SYS-CON's 16th International Cloud Expo® New York, which will take place June 9-11, 2015, at the Javits Center in New York City, NY. SafeLogic provides security products for applications in mobile and server/appliance environments. SafeLogic’s flagship product CryptoComply is a FIPS 140-2 validated cryptographic engine designed to secure data on servers, workstations, appliances, mobile devices, and in the Cloud.
SYS-CON Events announced today that StorPool Storage will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. StorPool is distributed storage software that allows service providers, enterprises and other cloud builders to run data storage on standard x86 servers, instead of using expensive and inefficient storage arrays (SAN).
GENBAND has announced that SageNet is leveraging the Nuvia platform to deliver Unified Communications as a Service (UCaaS) to its large base of retail and enterprise customers. Nuvia’s cloud-based solution provides SageNet’s customers with a full suite of business communications and collaboration tools. Two large national SageNet retail customers have recently signed up to deploy the Nuvia platform and the company will continue to sell the service to new and existing customers. Nuvia’s capabilities include HD voice, video, multimedia messaging, mobility, conferencing, Web collaboration, deskt...
SYS-CON Events announced today that Site24x7, the cloud infrastructure monitoring service, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Site24x7 is a cloud infrastructure monitoring service that helps monitor the uptime and performance of websites, online applications, servers, mobile websites and custom APIs. The monitoring is done from 50+ locations across the world and from various wireless carriers, thus providing a global perspective of the end-user experience. Site24x7 supports monitoring H...
Sonus Networks introduced the Sonus WebRTC Services Solution, a virtualized Web Real-Time Communications (WebRTC) offer, purpose-built for the Cloud. The WebRTC Services Solution provides signaling from WebRTC-to-WebRTC applications and interworking from WebRTC-to-Session Initiation Protocol (SIP), delivering advanced real-time communications capabilities on mobile applications and on websites, which are accessible via a browser.
SYS-CON Events announced today that Intelligent Systems Services will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Established in 1994, Intelligent Systems Services Inc. is located near Washington, DC, with representatives and partners nationwide. ISS’s well-established track record is based on the continuous pursuit of excellence in designing, implementing and supporting nationwide clients’ mission-critical systems. ISS has completed many successful projects in Healthcare, Commercial, Manufacturing, ...
SYS-CON Events announced today that B2Cloud, a provider of enterprise resource planning software, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. B2cloud develops the software you need. They have the ideal tools to help you work with your clients. B2Cloud’s main solutions include AGIS – ERP, CLOHC, AGIS – Invoice, and IZUM
SYS-CON Events announced today that Tufin, the market-leading provider of Security Policy Orchestration Solutions, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. As the market leader of Security Policy Orchestration, Tufin automates and accelerates network configuration changes while maintaining security and compliance. Tufin's award-winning Orchestration Suite™ gives IT organizations the power and agility to enforce security policy across complex, multi-vendor enterprise networks. With more than 1...
SYS-CON Events announced today that Cloudian, Inc., the leading provider of hybrid cloud storage solutions, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. Cloudian, Inc., is a Foster City, California - based software company specializing in cloud storage software. The main product is Cloudian, an Amazon S3-compliant cloud object storage platform, the bedrock of cloud computing systems, that enables cloud service providers and enterprises to build reliable, affordable and scalable cloud storage solu...